混合动力车制动工况分析与储能装置参数匹配

为提高混合动力系统整体性能,实现高效能量回收,分析某重型越野车辆驾驶循环工况中制动过程的功率与能量分布,从制动能量回收率与电机参数出发讨论对储能装置的性能要求. 提出电池组-超级电容复合储能装置的参数匹配方法,针对21 t级试验样车混合动力系统进行实例计算,论证锂离子电池组与超级电容组成的复合储能装置的性能. 实例计算与道路试验结果表明:匹配的复合储能装置符合车辆整体性能与制动能量回收的要求,体积、重量满足总体设计约束;匹配超级电容后,储能装置的瞬时功率能力大幅提升,可显著提高车辆的制动能力和制动能量回收率.     

黏滞阻尼器在某续建加固项目中的应用

对某续建加固项目进行了普通钢支撑方案和黏滞阻尼支撑方案的对比,给出了黏滞阻尼器的布置形式和设计参数,通过ETABS计算分析表明设置黏滞阻尼器能显著降低结构的地震响应,提高结构抗震性能,减小结构加固量。     

Simultaneously achieved high-energy storage density and efficiency in (K,Na)NbO3-based lead-free ferroelectric films

With the development of advanced electrical and electronic devices and the requirement of environmental protection, lead-free dielectric capacitors with excellent energy storage performance have aroused great attention. However, it is a great challenge to achieve both large energy storage density and high efficiency simultaneously in dielectric capacitors. This work investigates the energy storage performance of sol-gel-processed (K,Na)NbO₃-based lead-free ferroelectric films on silicon substrates with compositions of 0.95(K_0.49Na_0.49Li_0.02)(Nb_0.8Ta_0.2)O₃-0.05CaZrO₃-x mol% Mn (KNN-LT-CZ5-x mol% Mn). The appropriate amount of Mn-doping facilitates the coexistence of orthorhombic and tetragonal phases, suppresses the leakage current, and considerably enhances the breakdown strengths of KNN-LT-CZ5 films. Consequently, large recoverable energy storage density up to 64.6 J cm⁻³ with a high efficiency of 84.6% under an electric field of 3080 kV cm⁻¹ are achieved in KNN-LT-CZ5-5 mol% Mn film. This, to the best of our knowledge, is superior to the majority of both the lead-based and lead-free films on silicon substrates and thus demonstrates great potentials of (K,Na)NbO₃-based lead-free films as dielectric energy storage materials.     

中国科学院成功研制出氧化钛“光开关”材料

采用循环伏安电沉积技术在钛基上获得水合氧化钌(RuOx·nH2O),其比容量为105F/g。通过电化学测试(循环伏安、恒电流充放电)、X射线衍射(XRD)、扫描电镜(SEM)以及X射线光电子能谱(XPS)等方法研究了沉积物的电化学性质、物相及组成。结果表明:电沉积法获得的水合氧化钌呈非晶态结构,它由多氧化态钌混合羟基氧化物组成。在1.0mol·L-1H2SO4溶液中,该氧化物呈准电容特征,有较高电化学可逆性,可用作电化学电容器电极材料。     

Mechanism of strengthening of cube texture for high purity aluminum foils by additional-annealing

1　INTRODUCTIONHighpurityaluminumfoilsareusedastheanodematerialofhighvoltageelectrolyticcapacitorswhichneedstrongcubetexture { 0 0 1}〈10 0〉forlargeeffec tivesurfacefromchanneletching[1] .Becauseofitstechnicalimportance ,alotofeffortshavebeenmadetodevelopstrongcubetextureinhigh purityalu minumfoils[2 8] .Itwasfoundthatthecubetextureinthefoilscanbestrengthenedviaanannealingpro cessfollowedbyalowcoldrolling[7,8] ,andsuchanannealingiscalledadditional annealinginthispaper .Buttherewerefewinv…     

大型电站叠梁门分层取水进水口水力特性研究

电站进口前加设叠梁门后引起局部水流条件复杂,本文以模型试验和数值模拟为研究手段,系统阐述了叠梁门分层取水进口水流流态、门顶最小运行水深、水头损失和叠梁门反向附加水击压力等。研究表明,加设叠梁门后机组各栅孔进流较为均化,门井水面波动加大,主要引流区间在门顶以下10 m—门顶以上25 m水域,叠梁门门顶最小运行水深一般为15~30 m,进口段水头损失1.20~1.95 m(水头损失系数为0.45~1.15),较无叠梁门时增大1.11~1.63 m,对机组发电经济效益将产生一定影响,机组甩负荷对叠梁门下游面板产生的附加水击压力(2.9~3.0)×9.81 k Pa。     

闸下海漫柔性加糙体消能防冲机理试验

通过室内水工模型试验,量测了采用废旧轮胎加糙后三维流速的分布。结果表明:加糙后近底流速明显降低,但整个断面的平均流速近似相等;随着轮胎排数的增加,水流紊流强度平均值增大,附加切应力增大,流体质点间相互混掺的情况加剧,从而使消能效率得以提高。     

基于三次B样条插值的形状错误隐藏算法

分析了基于Bézier插值的视频对象形状错误隐藏方法的不足,即计算附加控制点的过程复杂,隐藏结果受附加控制点影响大。针对这一问题,提出了一种基于三次B样条插值的错误隐藏算法。对三次B样条插值的矩阵公式进行了改进,保证目标轮廓的平滑性;直接对已知轮廓点插值,克服了传统方法的不足。与传统方法对比实验表明,新算法简单易实现,有较好的实用意义。     

Ultrahigh Energy Storage Capacitors Based on Freestanding Single-Crystalline Antiferroelectric Membrane/PVDF Composites

Inorganic/organic dielectric composites are very attractive for high energy density electrostatic capacitors. Usually, linear dielectric and ferroelectric materials are chosen as inorganic fillers to improve energy storage performance. Antiferroelectric (AFE) materials, especially single-crystalline AFE oxides, have relatively high efficiency and higher density than linear dielectrics or ferroelectrics. However, adding single-crystalline AFE oxides into polymers to construct composite with improved energy storage performance remains elusive. In this study, high-quality freestanding single-crystalline PbZrO₃ membranes are obtained by a water-soluble sacrificial layer method. They exhibit classic AFE behavior and then 2D–2D type PbZrO₃/PVDF composites with the different film thicknesses of PbZrO₃ (0.1-0.4 µm) is constructed. Their dielectric properties and polarization response improve significantly as compared to pure PVDF and are optimized in the PbZrO₃(0.3 µm)/PVDF composite. Consequently, a record-high energy density of 43.3 J cm⁻³ is achieved at a large breakdown strength of 750 MV m⁻¹. Phase-field simulation indicates that inserting PbZrO₃ membranes effectively reduces the breakdown path. Single-crystalline AFE oxide membranes will be useful fillers for composite-based high-power capacitors.     

A bandpass filter with adjustable bandwidth and predictable transmission zeros

In this article, a microstrip bandpass filter with an adjustable bandwidth and predictable transmission zeros is proposed. The proposed filter is implemented by combining two hairpin edge‐coupled resonators with interdigital capacitors. Compared to typical edge‐coupled filters, the proposed filter provides a wider bandwidth resulting from a higher coupling strength between its resonators. To further increase the coupling and consequently the bandwidth, a pair of etched slots in the ground plane is used. By adjusting the geometrical parameters of the interdigital capacitors and etched slots, the bandwidth can be easily adjusted. The filter features two transmission zeros, which are determined by means of the semi‐analytical model developed as part of this work. Furthermore, the proposed filters can be cascaded to obtain a sharper cutoff frequency response. Frequency responses of the filters from measurements are in good agreement with those simulated using IE3D in the 5–9 GHz range. © 2009 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2010.